Type EB3P/EB7P | Internal applicator Selection

Type EB3P/EB7P (Inner Pressure Automatic Control/Retro-Fit)

Type EB3P/EB7P

These types offer the feature of internal pressure automatic control in addition to the functionality of EB3-type.
This type delivers atomized droplets of lubricant through the through-spindle piping in a Machining Center or through the coolant piping in an NC lathe.
The lubricant is applied to the cutting edge by using a nozzle or a tool with oil hole(s).

Supply air	Remove dirt, oil content, and moisture
Pressure	EB3P: 0.4 to 0.7 MPa EB7P: 0.4 to 0.8 MPa
Flow rate	Maximum 350L/min (ANR)
Lubricant Control	Manual control by frequency generator
Inner Pressure Control	Automatic control by pressure switch
Lubricant	FUJI BC lubricant
Capacity	1200mL
Terminal Box	10 Poles terminal box
NET Weight	EB3P: 8.7kg EB7P: 8.7kg
Discharge rate	EB3P: 2~20mL/hour EB7P: 2~70mL/hour
How to Mount	M6 screw bolts on upper plate
EB3P Outline dimensional drawing
EB7P Outline dimensional drawing