Internal Applicator "EcoBooster" Internal applicator,called"EcoBooster", mix air and oil inside of applicator. Air-with-oil particle go through pipe of machine, then is blown from inside of tools. EcoBooster is used with CNC lathe and through-spindle-type machining center. Application of Machine tool CNC lathe with oil hole holder (See EB-tool page) Machining center Internal Application Specification   Code Specification EB3 EB3 series generates proper amount of micro lubricant droplets for MQL machining. EB3 controls the inner pressure of the chamber by regulator.Pump strokes are controlled by manual dial, EB3P EB3 series generates proper amount of micro lubricant droplets for MQL machining Type-P controls the inner pressure of the chamber automatically by pressure switch and solenoid valves. EB7P EB7 series generates large volume of micro lubricant droplets with less air supply.  Type-P controls the inner pressure of the chamber automatically by pressure switch and solenoid valves. EB3EP EB3 series generates proper amount of micro lubricant droplets for MQL machining. Type-EP controls the pump strokes and the inner pressure of the chamber automatically by CNC of machine. For the EP model,pump strokes and inner pressure in the chamber are controlled by the machine side using Mcode,PLC or other command. EB7EP EB7 series generates large volume of micro lubricant droplets with less air supply. Type-EP controls the pump strokes and the inner pressure of the chamber automatically by CNC of machine. For the EP model,pump strokes and inner pressure in the chamber are controlled by the machine side using Mcode,PLC or other command.

| HOME |